Publicité
Les langues disponibles
Les langues disponibles
The following instructions are for Breeze hoods beginning with serial number prefix 13 and later.
NOTE: Skip the recirculating preparation pages if you are ducting the air out of your home.
An air recirculating kit (optional) must be
purchased before using hood in recirculat-
ing mode.
Recirculating kit - 0AK11-21001
2. Insert charcoal filter into charcoal filter
holder (B) and place it over the safety grille
body (A)
4. Remove each screw from recirculating
top plate. Plate is located on top of hood
towards the front.
1. Secure each of the (2) spring clips to the
safety grille body (A). Do this by inserting
the screw through the spring and into the
clip. Secure each clip to the safety grille
body by using a philips head screwdriver.
3. Secure charcoal filter holder to safety
grill body by lifting up on spring clips and
twisting. The clip should cover the lip of the
charcoal filter holder securely.
Recirculating preparation
continued on next page
11
Publicité
