Publicité
Les langues disponibles
Les langues disponibles
B
Using the appliance
Installing the anti-tilt attachment
To avoid the cooker tilting, install the attachment provided with your product, following the
procedure below:
Drill a hole 6.0 cm from the floor in the wall against which your cooker will be installed
A
.
B
Then, drill a second hole 10.3 cm from the floor
. Using the two screws and dowels
provided, attach the flat angle bracket to the wall, aligning the holes in the bracket with the
ones you've just drilled in the wall.
B
A
7
EN
Publicité
