Publicité
Les langues disponibles
Les langues disponibles
▪ Restart the unit according to the start instructions. Never use a knife or other
sharp instrument to scrape ice inside.
Cleaning the inside
After defrosting you should clean the appliance internally with a weak solution of
bicarbonate of soda. Then rinse with warm water using a damp sponge or cloth and
wipe dry. Wash the baskets in warm soapy water and ensure they are completely dry
before replacing them. Condensation will form on the back wall of the fridge; however,
it will normally run down the back wall and into the drain hole behind the vegetable
drawer.
Cleaning the outside
Use standard non-abrasive detergent diluted in warm water to clean the exterior.
The grille of the condenser at the back and the adjacent components can be vacuumed
using a soft brush attachment.
Do not use harsh cleaners, scouring pads or solvents to clean any part of the
appliance.
If you're going on vacation
If your appliance is not to be used for several months, remove all food, turn off and
unplug the appliance from the outlet. Clean and dry the inside and outside of the
appliance thoroughly. Also leave the door open, blocking it if necessary, to prevent
condensation, odors, mold.
Moving the unit
▪ Location
Do not place your appliance near a heat source, for example stove, boiler or radiator.
Also, avoid direct sunlight.
▪ Leveling
Make sure the appliance is level. Use the adjustable feet at the front. If the appliance
is not level, the doors and magnetic sealing alignments will be affected and may cause
malfunctions.
▪ Do not turn on the appliance for 4 hours
After any movement, it must not be connected for 4 hours. This delay allows the coolant
to be adjusted.
▪ Installation
Let your device breathe. Heat is released from the walls so it is important to leave a
circulation of air around your device.
32
Publicité
