Publicité
Les langues disponibles
Les langues disponibles
Congratulations!
You have chosen to purchase a high-quality
product. Familiarise yourself with the product
before using it for the first time.
Read the following assembly
instructions and the safety informa-
tion carefully.
Use the product only as described and only
for the given areas of application. Store these
assembly instructions carefully. When passing
the product on to third parties, please also hand
over all accompanying documents.
Package contents (Fig. A)
1 x shelf, disassembled (1–4)
8 x metal rod (5)
4 x foot (6)
1 x assembly materials (7–11)
1 x sheet of stickers with covers (12)
1 x Allen key (13)
1 x assembly instructions
Technical data
Maximum load: 7kg per shelf
7
Dimensions:
approx. 80 x 145 x 30cm (W x H x D)
Date of manufacture (month/year):
07/2019
Intended use
The product is designed for indoor use. The
product is not intended for commercial use.
Safety information
Life-threatening hazard!
• Never leave children unsupervised with the
packaging materials. There is a risk of suffo-
cation.
Risk of injury!
• Make sure the product is properly stabilised
before use.
• The product may only be used under adult
supervision and may not be used as a toy.
10
GB/IE
• The product is not a toy or a climbing appa-
ratus! Ensure that persons, especially children,
do not pull themselves up on the product. The
product can tip over.
• Check the product for damage or wear
before each use. The product should only be
used if it is in perfect condition!
• Check regularly to make sure all screws are
tight.
• Ensure that the product has been assembled
properly and in accordance with these assem-
bly instructions. Improper assembly can lead
to injuries and impair the product's safety and
functionality.
• Make sure the wall is suitable for mounting
the product. Unsuitable wall surfaces can lead
to injuries.
Assembly
Because of the product's size, it is recommended
that two people assemble the product.
To assemble the product you will need a drill
and a Phillips screwdriver (not included in the
package contents), as well as the supplied Allen
key (13).
1. Assemble three levels as shown in Fig. B.
Note: make sure that the screws (7), (8) screw
into the stepped drill hole of the boards (2).
2. Fasten the baseplate (3), the side wall (4)
and the metal rods (5) with the screws (7), (8)
(Fig. C).
3. Screw the screw threads (9) into the baseplate
(3) (Fig. C).
Note: first screw the screw threads (9) into the
baseplate (3), otherwise the feet (6) cannot be
fastened onto the baseplate (3).
4. Rotate the feet (6) onto the screw threads (9)
(Fig. C).
Note: rotate the feet in or out depending on
the texture of the floor, in order to make up for
unevenness.
5. Place all levels one above the other in an
alternating pattern and screw them together
tightly (Fig. D).
6. Stick one cover (12) onto each visible screw
head (Fig. D).
7. Place the product on a level surface (Fig. E).
Publicité
