KitchenAid 4KFC3511 Manuel D'instructions page 8

OPERATINg yOUR FOOD ChOPPER
Using the Food Chopper
1. Be sure the Food Chopper is unplugged.
2. Align the tabs on the work bowl with
the L-slots on the base. Twist bowl
counterclockwise to lock into place.
3. Fit the blade over the shaft in the
center of the work bowl, rotate, and
press down until it locks into operating
position.
4. Place ingredients to be processed into
the work bowl.
Removing Ingredients
1. Once the blade has stopped spinning,
remove lid by twisting it clockwise and
lifting it off.
2. Remove the work bowl from the base
by twisting it clockwise and lifting it off.
Blade locks on the shaft to stay in place
while you pour out ingredients
8
5. Place the lid on the workbowl,
aligning the L-slots on the lid with
the tabs on the work bowl. Twist lid
counterclockwise to lock into place as
shown below.
NOTE: Bowl and lid must be locked in
place for the Food Chopper to operate.
6. Plug power cord into
electrical outlet.
7. Press and hold Chop
or Puree button to
start processing.
NOTE: Food Chopper will not
operate if both buttons are pressed
at the same time.
8. Use the wet ingredient adder to add
liquid ingredients while processing,
if desired. See "Operating Tips for
Great Results".
9. When ingredients are chopped to
the desired consistency, release the
Chop or Puree button.
3. Use a spatula to remove ingredients
from the work bowl.
4. To remove blade for cleaning, pull the
blade straight up to unlock and remove
it from the bowl.