Maxima MOTOMAX 350 Instructions D'emploi page 62

Preparing for use
5.4 Adjusting the wheel guard
4
If the separating device has been installed in the outer position, ensure when adjusting the wheel
guard that the water supply line is not clamped and that contact between the cut-off wheel and
water supply line in operation is excluded.
ENGLISH 18
MOTOMAX 350
The wheel guard (2) can be rotated forward and
3
backward in a limited area.
2 For adjustment of the wheel guard, the power tool
must be put securely on the ground. Securely hold
the power tool at the top handle (4) with the left
hand and push it firmly onto the ground. With the
right hand at the handle for wheel guard
adjustment (3), rotate the wheel guard accordingly.
To keep sparks and particles away from the user,
the wheel guard always must be rotated forward as
far as the working situation permits.