Publicité
Les langues disponibles
Les langues disponibles
How to reverse the door
Tool required: Philips screwdriver, Flat bladed screwdriver, Hexagonal spanner.
• Ensure the unit is unplugged and empty.
• To take the door off, it is necessary to tilt the unit backwards. You should rest the unit on
something solid so that it will not slip during the door reversing process.
• All parts removed must he saved to do the reinstallation of the door.
• Do not lay the unit flat as this may damage the coolant system.
• lt' s better that 2 people handle the unit during assembly.
1. Carefully remove the top hinge cover with a flat screw driver
2. Unscrew the top hinge with a Philips screw driver.
3. Remove the hole cover with a flat screw driver.
4. Move the core cover from left side to right side. And then lift the upper door and
place it on a padded surface to prevent it from scratching.
5. Unscrew the middle hinge and then lift the bottom door and put it on a soft pad
to avoid scratch.
6. Move two middle hole covers from left to right.
7. Lie down the rear of cabinet on a soft pad. And unscrew the bottom hinge and
leveling foot.
32
Publicité
