ial or thick cardboard and tape
it tightly. Secure the moving
parts of the product firmly to
prevent damage.
• Before the product is installed,
check the product for any dam-
age after transport. Contact
the importer or the authorized
service centre if damaged.
1.5
Installation Safety
• Before beginning the installa-
tion, de-energize the power line
to which the product will be
connected by turning off the
fuse.
• Always wear protective gloves
during transport and installa-
tion. Otherwise there is a risk
of injury from sharp edges!
• Before the product is installed,
check the product for any dam-
age. Do not have it installed if
the product is damaged.
• Avoid using any heat-insulating
materials to cover the interior
of the furniture that will be in-
stalled.
• Direct sunlight and heat
sources, such as electric or
gas heaters, must not be
present in the area where the
product is installed.
• Keep the surroundings of all
ventilation ducts of the
product open.
• Do not install the product near
a window. There is a risk that
the hob flame will ignite cur-
tains and flammable materials
around the hob. When you
open the window, hot cook-
ware may tip over.
• Do not install the product near
a window. When you open the
window, hot cookware may tip
over.
• If there is a socket behind the
place where the product will be
installed, it must be ensured
that the product does not
come into contact with the
socket nor with the plug
plugged into the socket.
• There should be no gas hose,
plastic water pipe and socket
on the back or side wall of the
place where the product will be
installed. Otherwise, they may
be deformed by the heat effect
when the hob is operated and
may create a safety risk.
1.6
Safety of Use
• Ensure that the appliance is
switched off after every use.
• If you will not use the product
for a long time, unplug it or
turn off the power from the
fuse box.
• Don't use the product if it
breaks down or gets damaged
while being used. Disconnect
EN / 7
EN
FR
IT