T R O U B LE S HO O T I NG
Troubleshooting
Burners do not light.
•
Push burner control knob in and verify igniter glows.
•
Verify electrical power to grill and home circuit breaker
is on.
•
Verify GFCI has not been tripped.
•
Purge line of trapped air.
•
If no electrical supply is available, burners can be lit
manually. Refer to page 9.
Hot surface igniter does not operate.
•
Verify electrical power to grill and home circuit breaker
is on.
•
Verify GFCI has not been tripped.
Burners do not heat properly.
•
Verify proper gas supply.
•
Verify gas supply line is not bent or kinked.
•
Preheat burners for 10 minutes.
•
Inspect grill burners for spiders, insects or other
obstructions.
WARNING
Spiders and insects can nest in burners causing a fire
hazard and damage to the grill.
Burner flame blows out.
•
Verify proper gas supply.
•
If exposed to wind, provide a wind block.
Smell of gas is present.
•
Contact Wolf Factory Certified Service or gas supplier to
check for gas leak.
Sub-Zero, Sub-Zero & Design, Sub-Zero & Snowflake Design, Dual Refrigeration, The Living Kitchen, Great American Kitchens The Fine Art of Kitchen Design, Wolf, Wolf &
Design, Wolf Gourmet, W & Design, red colored knobs, Cove, and Cove & Design are registered trademarks and service marks of Sub-Zero Group, Inc. and its subsidiaries.
All other trademarks are property of their respective owners in the United States and other countries.
|
14
Wolf Customer Care 800.222.7820
Excessive flare-ups occur.
•
Clean burner grates.
•
Excess fat on meat or excessive cooking temperature.
Interior or control knob lights do not operate.
•
Verify electrical power to grill and home circuit breaker
is on.
•
Verify GFCI has not been tripped.
•
Interior light bulb may need to be replaced.
SERVI C E
•
Maintain the quality built into your product by contacting
Wolf Factory Certified Service. For the name of the
nearest Wolf Factory Certified Service, check the contact
& support section of our website, wolfappliance.com or
call Wolf customer care at 800-222-7820.
•
When contacting service, you will need the model and
serial number of your product. Both numbers are listed
on the product rating plate. Refer to page 6 for rating
plate location.
•
For warranty purposes, you will also need the date of
installation and name of your authorized Wolf dealer. This
information should be recorded on page 3 of this guide.