Item
Half-load button
Extra-dry button
Half-load indicator
Extra-dry indicator
Salt indicator
Rinse aid indicator
PROGRAMS
Icon
Name
P1 - Intensive
P2 - Basic
P3 - Eco
P4 - Quick '90
90
P5 - Quick '30
Note:
The eco program is suitable to clean normally soiled dishes. It is the most efficient program because of
the combined energy and water consumption and it complies with the EU ecodesign legislation.
5
Operation
PREPARING FOR OPERATION
1. Do a check if the electricity and the water supply connections of the appliance match the values indicated in the
installation instructions.
2. Remove all packaging material inside the appliance.
3. Fill the salt reservoir. Refer to section
4. Fill the rinse aid reservoir. Refer to section
FILLING THE SALT RESERVOIR
For a good result the appliance needs soft (less calcareous) water. Salt is used to soften the water and it prevents
white lime residues on your dishes and the interior of the appliance.
Function
To decrease the duration of the selected program.
This decreases energy and water consumption.
To select the extra-dry option.
To show that the half-load option is selected.
To show that the extra-dry option is selected.
To show that the level of salt is low.
The indicator is on when the salt reservoir is almost
empty.
To show that the level of rinse aid is low.
The indicator is on when the rinse aid reservoir is almost
empty.
Description
Program for heavily soiled dishes.
Program for normally soiled dishes.
Daily program for normally soiled dishes. The program
takes longer, but uses less water and slowly heats for
lower energy consumption.
Short program for normally soiled dishes.
Short program for lightly soiled dishes, such as cups and
glasses.
'Filling the salt reservoir'
.
'Filling the rinse aid reservoir'
.
English
Time
[min.]
205
175
220
90
30
•
37