Télécharger Imprimer la page

Jenn-Air JDTSS246GMSP Mode D'emploi page 5

Publicité

Les langues disponibles

Les langues disponibles

Displays how many hours before the cycle
will begin.
To delay the start:
1. Select a wash cycle and options.
2. Press 1-24 HOUR DELAY. Each time you
press 1-24 Hour Delay, it will display the next
available delay time.
3. Press START/CANCEL to begin the delay
countdown.
NOTE: If the door is opened, such as to add a
dish, the Start/Cancel button must be pressed to
resume the delay countdown.
For added convenience, use for washing a small
load of dishes in the top or bottom rack to help
keep the kitchen continuously clean.
Dries dishes with heat (and fan, depending on
cycle/option combination). This option, with the
use of rinse aid, will provide better drying results.
Plastic items are less likely to deform when loaded
in the top rack. Use Precision Dry + for optimum
drying performance. For air dry, turn Precision
Dry + off.
Sanitizes dishes and glassware in accordance
with NSF International NSF/ANSI Standard 184
for Residential Dishwashers. Certified residential
dishwashers are not intended for licensed food
establishments. Only sanitizing cycles have been
designed to meet the requirements of the NSF/
ANSI 184 performance standard for soil removal
and for sanitization efficacy. There is no intention,
either directly or indirectly, that all cycles on a
NSF/ANSI 184 certified dishwasher meet the NSF/
ANSI 184 performance standard for soil removal
and for sanitization efficacy.
The Sanitize Rinse indicator glows at the end
of the cycle if the Sanitize Rinse option was
successfully completed. If the indicator does not
activate, it is probably due to the cycle being
interrupted.
Raises the main wash temperature to improve
cleaning for loads containing tough, baked-on food.
Raises the temperature with the power of steam
before final rinse to help enhance shine, finish,
and reduce glass spots.
The upper rack has flip-up spray nozzles that
reach into deeper items such as sports bottles,
baby bottles, or oddly shaped items. Flip the
(on some
nozzles up to use them and down to move them
models)
out of the way.
OPTIONS
CAN BE
WHAT IT DOES
SELECTED
WITH
Available
Delays start of
with any
a cycle up to
cycle
24 hours.
Available
Slightly faster wash
with any
for smaller loads
cycle
Available
Uses a heating
with any
element to speed
cycle except
drying times.
Refresh
Precision Dry +
option defaults to On
when any cycle is
selected, except for
1 Hour wash cycle.
Sensor
Raises main wash
temperature from
Cookware
105°F to 140°F
Normal
(41°C to 60°C) and
the final rinse from
140°F to 155°F
(60°C to 68°C).
Sensor
Raises the main
wash temperature
Cookware
from 105°F (41°C) to
Normal
either 130°F or 140°F
Crystal
(55°C or 60°C).
Sensor
Raises main wash
temperature from
Cookware
105°F to 140°F
Normal
(41°C to 60°C),
steam clean before
rinsing, final rinse
temperature 140°F
to 155°F (60°C to
68°C).
Sensor
Tall Bottle Wash
nozzles ensure
Cookware
interior wash and
Normal
rinse coverage
Crystal
inside taller items,
such as bottles.
1 Hour
5
ADDED TIME
ADDED WATER
TO CYCLE
GALLONS
(LITERS)
NA
NA
0
0
0:10 to 0:50
0
0:00 to 2:20
1.2 to 6.2
(4.8 to 23.3)
0:00 to 0:30
0 to 3.0
(0 to 11.2)
1:15 to 1:40
0 to 3.9
(0 to 14.9)
0:07
0

Publicité

loading