Télécharger Imprimer la page

Domo DO1002KR Mode D'emploi page 35

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 11
Note:
· Never run the blender empty.
· Never fill the work bowl with boiling fluids; always allow them to cool to room
temperature.
· If you want to crush ice, do not use more than 9 ice cubes (4x4x2 cm) at a time.
DISASSEMBLY
1.
Remove the plug from the socket.
2.
Remove the lid from the mixing bowl.
3.
Turn the release button a quarter turn to the left, push the head up entirely and turn the
release button to the right again, so that it points upwards, to lock the head.
4.
Push the accessory out of the locked position and turn it clockwise a quarter turn. Then
slide the accessory off of the drive shaft and remove the accessory. Use caution when
removing the accessories since there may be sharp edges.
5.
Turn the bowl counterclockwise out of the lock position and remove the bowl.
6.
Turn the release button a quarter turn to the left, push the head down entirely and turn
the release button a quarter turn to the right again so that it point upwards, to lock the
head.
CLEANING AND MAINTENANCE
· Always remove the plug from the socket before cleaning the appliance.
· Never immerse the motor unit in water or under running water. Clean the motor unit with a
soft, damp cloth.
· Disassemble all accessories according to the instructions under the section 'Disassembly'.
· For quick cleaning, rinse the accessories under running water.
· For thorough cleaning, wash, rinse and dry the accessories.
· To clean the blender, combine warm water with a few drops of detergent in the blender.
Put the lid on the blender. Briefly turn the speed regulator to pulse and back. Repeat if
needed. Rinse the blender under running water and allow it to drip-dry upside down.
www.domo-elektro.be
35
DO1002KR

Publicité

loading