JVC KD-X282DBT Guide De Démarrage Rapide page 13

Getting Started
1
Acknowledge the crossover type and cancel the
demonstration
When you turn on the power for the first time (or [FACTORY RESET] is set to
[YES]), the display shows: "2-WAY X'OVER" or "3-WAY X'OVER" "PRESS"
"VOLUME KNOB" "TO CONFIRM".
1
Press the volume knob to acknowledge the current crossover type.
Then, the display shows: "CANCEL DEMO" "PRESS" "VOLUME KNOB".
2 Press the volume knob.
[YES] is selected for the initial setup.
3 Press the volume knob again.
"DEMO OFF" appears.
2
Set the clock and date
1
Press and hold .
2
Turn the volume knob to select [CLOCK], then press the knob.
To adjust the clock
3 Turn the volume knob to select [CLOCK ADJUST], then press the knob.
4
Turn the volume knob to make the settings, then press the knob.
Set the time in the order of "Hour" "Minute".
5
Turn the volume knob to select [CLOCK FORMAT], then press the knob.
6
Turn the volume knob to select [12H] or [24H], then press the knob.
To set the date
7
Turn the volume knob to select [DATE SET], then press the knob.
8 Turn the volume knob to make the settings, then press the knob.
Set the date in the order of "Day" "Month" "Year".
9
Press to exit.
To return to the previous setting item, press
3
1
2
3
4
To return to the previous setting item, press
[SYSTEM]
[CLOCK]
[ENGLISH]/[РУССКИЙ]/[ESPANOL]/[FRANCAIS]
Select the display language for menu and music information if applicable.
By default, [ENGLISH] is selected.
Digital Radio
About DAB (Digital Audio Broadcasting)
DAB is one of the digital radio broadcasting systems available today. It can
deliver digital quality sound without any annoying interference or signal
distortion. Furthermore, it can carry text, pictures and data.
In contrast to FM broadcast, where each program is transmitted on its own
frequency, DAB combines several programs (called "services") to form one
.
"ensemble".
Set the basic settings
Press and hold .
Turn the volume knob to select an item (see the following table), then
press the knob.
2
Repeat step until the desired item is selected or activated.
Press to exit.
[KEY BEEP] (Not applicable when 3-way crossover is selected.)
[ON]: Activates the keypress tone. ; [OFF]: Deactivates.
[FACTORY RESET] [YES]: Resets the settings to default (except the stored station). ;
[NO]: Cancels.
[CLOCK DISPLAY] [ON]: The clock time is shown on the display even when the unit is
turned off. ; [OFF]: Cancels.
.
Default: [XX]
5