Publicité
Les langues disponibles
Les langues disponibles
Using the timer
Setting the clock
This is a 12-hour clock.
1
Press [CLOCK/TIMER] to select "CLOCK".
Each time you press the button:
CLOCK
Original display
2
Within 5 seconds, press [u/t] or [y/i] to set the time.
3
Press [CLOCK/TIMER] again to confirm.
Displaying the clock
Press [CLOCK/TIMER] to display the clock for a few seconds.
Note
The clock may lose or gain minutes over a period of time. Readjust as
necessary.
Using the play timer
You can set the timer to come on at a certain time to wake you up.
Preparation
•
Turn the unit on and set the clock.
•
Prepare the music source (disc, radio, USB or iPod) and set the
volume.
1
Press [CLOCK/TIMER] repeatedly to select play timer.
CLOCK
Original display
2
Within 5 seconds, press [u/t] or [y/i] to set the starting
time.
3
Press [CLOCK/TIMER] to confirm.
4
Repeat steps 2 and 3 to set the finishing time.
10
10
10
zPLAY
zPLAY
Start time
Play timer indicator
Finish time
To activate the timer
5
Press [z, PLAY] to turn on play timer.
zPLAY
6
Press [^] to turn off the unit.
To
change the settings
change the source
or volume
check the settings
(when the unit is on
or in standby mode)
cancel
Note
•
The play timer will start at the preset time, with the volume increasing
gradually to the preset level.
•
The timer comes on at the set time every day if the timer is on.
•
The unit must be in the standby mode for the timer to function.
•
If you turn the unit off and on again while a timer is functioning, the
finish time setting will not be activated.
PLAY
Using the sleep timer
This function enables you to turn off the unit automatically after the
set time.
Press [SLEEP] repeatedly to select your desired time.
To cancel
Press [SLEEP] to select "OFF".
Changing the remaining time
Press [SLEEP] to show the remaining time, and press [SLEEP] again
to select your desired time.
Note
The play and sleep timer can be used together. The sleep timer always
has priority. Be sure not to overlap timer settings.
No display (off)
Action
Repeat steps 1 to 4 and 6.
1) Press [z, PLAY] to clear the timer
indicator from the display.
2) Make changes to the source or volume.
3) Perform steps 5 and 6.
Press [CLOCK/TIMER] repeatedly to select
zPLAY.
Press [z, PLAY] to clear the timer indicators
from the display.
Sleep timer indicator
Publicité
