Wireless Settings - NETGEAR MBR1516 Guide De L'utilisateur

Wireless Settings

Note: The wireless router is already configured with the optimum settings.
Do not alter these settings unless directed by NETGEAR support.
Incorrect settings disable the wireless router.
Select ADVANCED > Advanced > Wireless Settings to display the following screen:
The following settings are available in this screen:
Advanced Wireless Settings. Do not change these settings unless directed to do so by
NETGEAR support.
• Enable Wireless Router Radio. You can completely turn off the wireless portion of
the wireless router by clearing this check box. Select this check box again to enable
the wireless portion of the router. When the wireless radio is disabled, other members
of your household can use the router by connecting their computers to the router with
an Ethernet cable.
• Enable SSID Broadcast. This setting enables broadcasting of the SSID.
Note: The Fragmentation Length, CTS/RTS Threshold, and Preamble
Mode options are reserved for wireless testing and advanced
configuration only. Do not change these settings.
• Wireless Signal Strength. This setting allows adjusting the power of Wi-Fi from 1%
(minimum) to 100% (maximum). Enter an integer ranging from 1 to 100 (default) in
this field. Lowering the Wi-Fi power limits the range of Wi-Fi and reduces the Wi-Fi
radiation.
WPS Settings.You can add WPS devices to your network.
Mobile LTE Broadband 11n Wireless Router MBR1516
Advanced Settings
69