Publicité
Les langues disponibles
Les langues disponibles
PROGRAMMING
IMPORTANT NOTES – PLEASE READ
This product is used to boost your existing AC or heater's airflow. It allows you to set temperature
points where the fans will turn on if the
airflow's temperature
falls below or rises above the cooling
or heating trigger's setting, respectively.
This product has 10 fan speeds from 1-10. Use the fan speed setting to set your desired airflow
boosting. Keep in mind the faster the fans spin, the louder they will be.
We've designed the fans to ramp up or down, instead of quickly turning on or shutting down to
minimize noise and power consumption.
When not changing settings, we recommend staying on the temperature display mode to monitor
and accurately gauge your airflow's temperature. Do not use your AC or heater's thermostat
reading; it does NOT display the airflow's temperature.
TEMPERATURE DISPLAY
This mode displays the airflow temperature measured by the probe.
While on this display mode, the cooling and heating triggers, as well as
the max fan speed setting, are still active unless you disabled them.
13
Publicité
