Publicité
Les langues disponibles
Les langues disponibles
SAFETY INSTRUCTIONS
WARNING: THIS GROUP IS DESIGNED FOR INTERMITTENT USE
TO WORK IN SAFE CONDITIONS WITH THIS TOOLING, IT IS IMPERATIVE TO READ CAREFULLY THE
DIRECTIONS FOR USE AND TO FOLLOW THE INSTRUCTIONS IT CONTAINS.
IF YOU DO NOT RESPECT THE INFORMATION WRITTEN IN THAT INSTRUCTION MANUAL THE
WARRANTY WILL BE CANCELLED.
This tool satisfies with European safety standards.
If you want to dispose this product, do not mix it with general household waste. There is a separate collection
system for used electronic products in accordance with legislation that requires proper treatment, recover and
recycling.
HYDRAULIC CRIMPING TOOL:
Do not slide your fingers in the dies profile.
Do not put your fingers in the head of the hydraulic crimping tool when you slide the dies inside it. Your fingers
could be pinched very severely.
Handle the locking spindle with precaution to avoid being pinched.
HYDRAULIC CUTTING TOOL:
Please, do not put your fingers between blades. Risk of grave cuts.
Handle the locking spindle with precaution to avoid being pinched.
CHECK THAT THE LOCK IS CLOSED CORRECTLY BEFORE CUTTING.
ADVICE:
It is recommended to keep the tool away from dusty or rough places, in order to avoid wrong working.
Although this tool is robust, it must be handled with care.
After use, wipe the tool carefully and replace it in its case.
Keep the tool inside, in a ventilated warehouse. Avoid fast temperature changes, this can produce condensation.
CHARGER:
See battery charger instruction manual.
BATTERY:
See battery charger instruction manual.
0215 - BGH700 - 17
DO NOT USE THIS TOOL ON LIVE CABLES
English
Publicité
