Start-Up; Inserting/Changing Batteries - ADE FITvigo BA 1600 Mode D'emploi

Start-up

Inserting/changing batteries

For use you require 4 batteries of type R03 (AAA), 1.5 V (included). The battery
compartment is located on the underside of the device.
1. Press the closing flap of the battery compartment cover in the direction of the
cover.
2. Remove the battery compartment cover.
3. Insert the batteries as depicted on the bottom of the battery compartment.
Pay attention to the correct polarity (+/-).
"8888" appears briefly on the display, then "0.0 kg".
4. Put the battery compartment cover back in place.
Notes on changing the battery:
‚ A change of batteries becomes necessary when "
display, or when nothing at all is displayed.
‚ Only use the type of battery that is specified in the "Technical Data".
‚ Always exchange all of the batteries at the same time.
‚ Dispose of batteries in an environmentally appropriate way (see
"Disposal").
Choosing the unit of measurement
When the scales are delivered, the unit of measurement is set to "kg" as standard.
However, the measurement result can also be displayed in the English units of
measurement, "lb" (pound) or "st" (stone).
− Press the Unit and Bluetooth button on the rear side of the scales repeatedly. Pay
attention to the display indicator.
Install app
1. Make sure your smartphone is connected with the internet.
2. Download the "FITvigo" app in the app store (iOS) or Google Play store (Android).
‚ Depending on the settings of your smartphone, additional costs may
be incurred for the internet connection or data transfer.
‚ We recommend downloading over a wireless network.
Body Analyser Scales BA 1600
Start-up
SYMBOL
" appears on the
23