Publicité
Les langues disponibles
Les langues disponibles
9 – Display and Confi guration
1
9-16 Firmware Upgrade Menu
Warning: The firmware should be upgraded by qualified service personnel only. Use only firmware that has been approved by Tripp Lite.
2
Failure to comply will void the warranty.
•
Enter the maintenance menu as described in
1
the scroll buttons ( , ) to move the cursor to "FIRMWARE
UPGRADE", then press the enter button (
3
4
•
Use the scroll buttons (
2
select one of the menu choices. You must enter the administrator
password to confirm the operation.
5
Note: Press the "ESC" button to return to the previous menu.
6
9-17 Other Menu Choices
7
•
Enter the maintenance menu as described in
1
scroll buttons ( , ) to move the cursor to "OTHERS", then press
the enter button (
).
8
9
•
2
Use the scroll buttons (
a menu choice. "SN & FW VERSION" shows the serial number
and firmware version of the UPS system. "SYSTEM TIME" shows
the UPS system's current date and time. "MODULE DC BUS
10
VOLT" shows the current voltage of the DC bus. Qualified service
personnel may wish to view this information when performing
maintenance or repair on the UPS system.
Note: Press the "ESC" button to return to the previous menu.
11
12
13
200803004 93-2793 SU80k manual 4C.indd E40
200803004 93-2793 SU80k manual 4C.indd E40
All manuals and user guides at all-guides.com
(continued)
Section
9-12. Use
).
, ) and the enter button (
) to
Section
9-12. Use the
, ) and the enter button (
) to select
1
2
1
2
40
6/16/2008 1:44:00 PM
6/16/2008 1:44:00 PM
Publicité
