Publicité
Les langues disponibles
Les langues disponibles
9 – Display and Confi guration
9-7 UPS System Setup Menu
•
Press the enter button (
1
menu.
•
Accessing the UPS system setup menu requires a password. From
2
the login screen, press the enter button (
to log in as an administrator or a user. Administrators can view
and change all UPS system parameters; regular users can view
all parameters, but can only change a few basic parameters. Only
qualified service personnel should log in as the administrator.
3
•
The password consists of 4 numerals. Press the scroll down button
( ) or the scroll up button ( ) to select the first numeral, then
press the enter button (
entering the last numeral, press the enter button (
the password choice. The default user password is 0000. The
default administrator password is 0000. Only qualified service
personnel should have access to the administrator password. See
Section 9-11
for instructions on changing the passwords.
•
After the correct password has been entered, the LCD screen will
4
show the UPS system setup menu.
9-8 Bypass Setup Menu
•
Enter the UPS system setup menu as described in
1
Use the scroll buttons ( , ) to move the cursor to "BYPASS
SETUP", then press the enter button (
•
Use the scroll buttons (
2
"VOLTAGE RANGE" or "FREQUENCY RANGE".
200803004 93-2793 SU80k manual 4C.indd E31
200803004 93-2793 SU80k manual 4C.indd E31
All manuals and user guides at all-guides.com
(continued)
) to select "UPS SETUP" from the main
) to select whether
) to enter the numeral choice. After
) to confirm
Section
9-7.
).
, ) and the enter button (
) to select
1
2
3
4
1
2
31
1
2
3
4
5
6
7
8
9
10
11
12
13
6/16/2008 1:43:57 PM
6/16/2008 1:43:57 PM
Publicité
