Publicité
Les langues disponibles
Les langues disponibles
6 - INSTRUCTIONS AND WARNINGS FOR THE END USER
Motorisation Plus produces systems for the automation of gates,
garage doors, automatic doors, shutters, parking lots and road
barriers. However, Motorisation Plus is not the manufacturer of
your automation system, which is rather the result of a process
of analysis, evaluation, selection of materials, and installation
performed by your own installer. Each automated system is unique
and only your installer has the experience and professionalism
required to create a system to suit your needs, safe and reliable over
time, and carried out in a workmanlike manner, i.e. compliant with
the current regulations. Even if your automation system meets the
security level required by law, this does not exclude the existence
of "residual risks", i.e. the possibility that it may cause dangerous
situations, usually as a result of improper or irresponsible use; for
this reason we would like to give you some suggestions:
• Before using the automation for the first time, ask the installer to
explain the origin of residual risks (Fig.1).
• Keep this manual for future use and deliver it to any new owner
of the automation.
• Inappropriate or improper use of the automation can make it
dangerous: do not command the movement of the automation if
people, animals or things are in its range.
• Children: If properly designed, an automation system ensures a
high degree of security, preventing movement in the presence of
people or things with its detection systems, and ensuring always
predictable and safe activation. It is prudent to prevent children
from playing near the automation and keep remote controls out of
their reach to prevent accidental activation.
• Malfunctions: As soon as you notice any malfunctions, disconnect
the system from the power supply and operate the manual release.
Do not attempt any repairs by yourself, but require the assistance
of your installer: meanwhile, the system can operate like a non-
automated opening device after releasing the motor reducer with
the release key supplied with the system.
• In case of failures or power failures: While awaiting the arrival of
your installer or the restore of the electricity, if the system is not
equipped with backup batteries, the automation can be operated
as any normal non-automated opening device. To do this, you
must run the manual release (Fig.2).
Release and manual movement: before performing this operation
pay attention that the device can be released only when the door
is stationary (Fig.2).
• Maintenance: Like any machine, your automation needs periodic
maintenance to ensure its long life and total safety. Agree with your
installer on a maintenance plan on a periodic basis; Motorisation
Plus recommends a frequency of 6 months for normal domestic
use, but this period may vary depending on the intensity of use. All
inspection, maintenance or repairs should be performed only by
qualified personnel.
ATTENTION!
Cleaning and user maintenance shall not be made by children
without supervision.
• Do not change the system and control or programming parameters
of the automation: the responsibility lies with your installer.
• The testing, routine maintenance and any repairs must be
documented by the person who performs them, and related
documents must kept by the owner.
The only interventions that are possible for the user and should
be carried out periodically are the cleaning of the slides and
photocells, as well as the removal of any leaves or rocks that could
hinder the automation. To prevent anyone from activating the gate
or door, before proceeding, remember to release the automation
and clean only with a cloth slightly dampened with water.
• Disposal: At the end of the automation useful life, make sure
that the dismantling is carried out by qualified personnel and the
materials are recycled or disposed of according to local regulations
in force.
• Operate the gate or door (with remote control, key switch, etc..);
if everything is working properly, the gate or the door will open
and close normally, otherwise the flashing light flashes and the
maneuver does not start.
With the safeties out of use, the automation must be repaired as
soon as possible.
Replacing the remote control battery: if your remote control seems
to work worse or not work at all after a while, this may simply
depend on the exhaustion of the battery (depending on use, it may
take several months to over a year). In that case, you will see that
the confirmation of transmission light does not turn on, or comes
on only briefly.
The batteries contain polluting substances: do not throw them in
the garbage but use the methods prescribed by local regulations.
Thank you for choosing Motorisation Plus; for more information
feel free to visit our website www.motorisationplus.com.
ATTENTION!
A more recent version of the manual supplied may be
available for download at www.motorisationplus.com; check
for updates.
EN
41
Publicité
