Publicité
Les langues disponibles
Les langues disponibles
User manual of Colson pulse Oximeter OxyPad – Home ref. CMS50DL / Pro ref. CMS50D
4. Press the switch button once on front panel.
5. Do not shake the finger and keep the patient at ease during the process. Meanwhile,
human body is not recommended in movement status.
6. Get the information directly from screen display.
7. In boot-strap state, press button, and the device is reset.
On the OxyPad Pro-CMS50D, the button
When the device is power off, pressing the button can open it;
When the device is power on, pressing the button shortly can change
direction of the screen;
When the device is power on, pressing the button long can change
brightness of the screen
Fingernails and the luminescent tube should be on the same side.
8 Repairing and Maintenance
Please change the batteries when the low-voltage displayed on the screen.
Please clean the surface of the device before using. Wipe the device with medical
alcohol first, and then let it dry in air or clean it by dry clean fabric.
Using the medical alcohol to disinfect the product after use, prevent from cross infection
for next time use.
Please take out the batteries if the oximeter is not in use for a long time.
The best storage environment of the device is - 40ºC to 60ºC ambient temperature and
not higher than 95% relative humidity.
Users are advised to calibrate the device termly (or according to the calibrating program
of hospital). It also can be performed at the state-appointed agent or just contact the
distributor for calibration.
High-pressure sterilization cannot be used on the device.
Do not immerse the device in liquid.
It is recommended that the device should be kept in a dry environment. Humidity
may reduce the useful life of the device, or even damage it.
has three functions :
１１
Publicité
