Publicité
Les langues disponibles
Les langues disponibles
User manual of Colson pulse Oximeter OxyPad – Home ref. CMS50DL / Pro ref. CMS50D
1.3 Attentions
Keep the oximeter away from dust, vibration, corrosive substances, explosive materials,
high temperature and moisture.
If the oximeter gets wet, please stop operating it.
When it is carried from cold environment to warm or humid environment, please do not
use it immediately.
DO NOT operate keys on front panel with sharp materials.
High temperature or high pressure steam disinfection of the oximeter is not permitted.
Refer to User Manual in the relative chapter for instructions of cleaning and disinfection.
Do not have the oximeter immerged in liquid. When it needs cleaning, please wipe its
surface with medical alcohol by soft material. Do not spray any liquid on the device
directly.
When cleaning the device with water, the temperature should be lower than 60℃.
As to the fingers which are too thin or too cold, it would probably affect the normal
measure of the patients' SpO2 and pulse rate, please clip the thick finger such as thumb
and middle finger deeply enough into the probe.
Do not use the device on infant or neonatal patients.
The product is suitable for children above four years old and adults（Weight should be
between 15kg to 110kg).
The device may not work for all patients. If you are unable to achieve stable readings,
discontinue use.
The update period of data is less than 5 seconds, which is changeable according to
different individual pulse rate.
If some abnormal conditions appear on the screen during test process, pull out the
finger and reinsert to restore normal use.
The device has normal useful life for three years since the first electrified use.
The hanging rope attached the product is made from Non- allergy material, if particular
group are sensitive to the hanging rope, stop using it. In addition, pay attention to the
use of the hanging rope, do not wear it around the neck avoiding cause harm to the
３
Publicité
