Publicité
Les langues disponibles
Les langues disponibles
Figure 2. Plugging solenoid cord into the receiver.
2) Plug the solenoid cord into the receiver's left jack
ASSEMBLY FOR TWO LAUNCHERS
Figure 3. Assembling two launchers in one receiver
1) Mount the receiver to the launcher.
2) Plug the solenoid cord into receiver's right jack.
(An extension cable will need to be purchased
separately)
16
How to launch the DOGTRA Remote Release Bird
Launchers
• First, test the launcher without any dummy or bird
inside.
WARNING
Keep your head away from the top of the launcher
when it is loaded. You could be injured if the dummy or
bird is launched accidentally.
Figure 4. Closing the launcher.
1) Close the bird cradle inside the launcher box and hold it
in place.
17
Publicité
