Maytronics Dolphin Mass 11 Mode D'emploi page 6

5. USING THE POOL CLEANER
5.1 Setup
Before using the Pool Cleaner for the first time, perform the following steps:
5.1.1 Position the power supply so
that it is approximately in the middle
of the long side of the pool at
a distance of 3m /10ft.
1
5.1.3
Attach the floating cable to the power
supply by inserting it with the notch on the
connector (1), lined up with the groove in
the socket on the power supply, and turning
clockwise (2).
4
3m/10ft
5.1.2 Unwind the cable and stretch it out completely so that
it has no kinks.
2
5.1.4
Plug in the power supply and leave it in the
OFF position.
Robotic Pool Cleaner Mass 11 User Instructions
|