EIBENSTOCK ETR 230.1 Notice Originale page 17

Specifications
Cutting System ETR 230.1
Rated voltage:
Power input:
Order Number:
Frequency:
No-load speed:
Max. disc diameter:
Spindle connection:
Protection class:
Degree of protection:
Net weight:
Interference suppression:
Available accesories:
Diamond cutting disc Ø230mm
Industrial Vacuum Cleaner ESS 35 MP
Content of Delivery
ETR 230.1 with suction hood, safety guard, diamond cutting disc, tool kit and
operating instructions in a carton.
Application for Indented Purpose
The ETR 230.1 cutting system is intended for professional use.
It may only be operated when fully assembled according to the assembly
instructions.
With the fitted suction hood as well as the correct diamond cutting wheel, it is
designed for dry cutting concrete and masonry with a minimum of dust.
For the protection of both the user and the machine, an industrial vacuum
(category M) with a power rating of at least 1200W must be connected.
Safety Instructions
Safe work with the machine is only possible if you read
this operating instruction completely and follow the
instructions contained strictly.
Additionally, the general safety instructions of the leaflet
supplied with the tool must be observed. Prior to the first
use, the user should absolve a practical training
If the mains cable gets damaged or cut during the use, do not
touch it, but instantly pull the plug out of the socket.
Never use the tool with damaged mains cable.
50/60 Hz
6500 rpm
230 mm
Ø 22.2 mm
II
IP 20
about 7,6 kg
EN 55014 and EN 61000
Ordernumber:
37448000
09931000
17
230 V ~
2600 W
0681C000