Penguin FLORENCE Manuel D'instructions page 33

STEP #4
Set polycarbonate exposed
side on the outside over
horizontal left guide I-3, use
one (1) Rr-3 panel, one (1)
P-3 joint and one (1) Ss-3
panel, then do the right side
with one (1) Tt-3 panel, one
(1) Q-3 joint and one (1)
Uu-3 panel over the J-3
horizontal panel. Secure P-
3 and Q-3 to I-3 and J-3
respectively with
tapping screws (PQ-3).
P-3
PQ-3
Ss-3
I-3
STEP #3
Slide brackets O-3 into ML-3 and MR-3 in equal quantity.
Then join ML-3 and MR-3 using N-3.Once assembled lift the
assembled wall track and position it above the vertical wall guides
Vv-3 and Ww-3 (approximate 96"from the ground).
Secure the wall track (ML-3, MR-3) and vertical wall guides (Vv-3
and Ww-3) to the wall by drilling holes through the aluminum, at
Vv-3
self-
Rr-3
Rr-3
P-3
I-3
P-3
33
NOTE:
Once the wall track is in place, apply
silicon along the top of the wall track
and at the joint of the two tracks.
Silicone is not supplied.
Ww-3
Ss-3
PQ-3
Tt-3
Tt-3 Q-3
Uu-3
J-3
Q-3
Uu-3
J-3