Powerplus POWX1280 Mode D'emploi page 36

2 x nuts M6
4 x nuts M4
4 x bolts M4 x 10 mm
4 x Ø4 washers
4 x Ø4 spring washers
2 x nuts M5
3.2 Accessory box content list (Fig. B)
A – 1 x polishing paste
B – 5 x abrasive belts Ø15 mm
B – 1 x arbor for abrasive belts Ø15 mm
B – 5 x abrasive belts Ø9 mm
B – 1 x arbor for abrasive belts Ø9 mm
C – 5 x polishing felts Ø25 mm
C – 5 x polishing felts Ø13 mm
C – 1 x arbor for polishing felts
D – 4 x cleaning brushes
E – 3 x brass brushes
If any parts are missing or damaged, please contact your dealer.
4 SYMBOLS
The following symbols are used in this manual and/or on the machine:
Denotes risk of personal
injury or damage to the tool.
Read manual before use.
Mandatory use of eye
protection.
Electrical products must not
be disposed with the
domestic waste.
Class II - The machine is double insulated; Earthing wire is therefore not
necessary.
5 GENERAL POWER TOOL SAFETY WARNINGS
Read all safety warnings and instructions. Failure to heed warnings and follow instructions
may result in electric shock, fire and/or serious injury. Keep safety warnings and instructions
Copyright © 2022 VARO
POWX1280
2 x bolts M5 x 45 mm
2 x Ø5 washers
2 x Ø5 spring washers
1 x accessory box
1 x manual
F – 12 x cutting discs Ø32 mm
F – 40 x cutting discs Ø24 mm
F – 1 x arbor for cutting discs
G – 2 x collet chucks (2.0 - 2.4 mm)
G – 1 x combination spanner
H – 1 x dressing stone
I – 5 x milling cutters
J – 5 x pencil grinders
K – 5 x pencil grinders
P a g e | 4
In accordance with essential
requirements of the European
directive(s).
Important information!
Wear gloves.
Wear noise protection.
www.varo.com
EN