Publicité
EN
Functional Description and Specifications
The following numbering refers to the illustration of the machine.
1
ON/OFF Trigger Switch
2
Trigger Lock
3
Chuck
4
Auxiliary handle
5
Lubrication container cap
Technical Data
Model
BPH6500
Rated Voltage/
230V ~ 50Hz
Frequency:
Input Power:
1300W
Impact Force:
18J
Chuck Type:
SDS-MAX
Max impact rate:
0 - 3600 bpm
Weight:
5,1 kg
Including: 1pc Auxilliary Handle, 1pc Point Chisel 18x320 mm, 1pc Flat Chisel 18x320 mm, 1 pair carbon brushes,
1pc Spanner, 1pc Grease tube, 2.0 m rubber VDE Cord & Plug
*Double Anti-Vibration & System of Locking Flat Chisel in 12 positions.
The electric motor has been designed for a specific voltage only. Always check that the power supply corresponds to
the voltage written on the rating plate.
Assembly Instructions - Main Adjustments
Before using the tool, please read all the instructions
Auxiliary Handle
Operate your machine only with the auxiliary handle.
The auxiliary handle can be set to any position for a secure and comfortable working posture.
Turn the handle (or the clamp) in an anticlockwise direction to adjust and set it to the required position. Then tighten the
handle turning it (or the clamp) in an clockwise direction or press the corresponding button and release it after
completing the adjustment.
Inserting the tool
Clean and lightly grease the tool shank before inserting it in the chuck.
Insert and twist the tool into the holder and push it in until it engages. The tool shank locks in position automatically. Pull
the tool to check if it is locked correctly.
In some cases, in order to insert or remove the tool you must pull the cover of the chuck backwards, insert the tool and
then release the cover to engage the tool.
Removing the tool
Push back the locking sleeve of the tool holder and remove the tool.
4
3
4
WWW.NIKOLAOUTOOLS.COM
5
1
1
2
Publicité
