Hansgrohe Metropol 32553000 Mode D'emploi / Instructions De Montage page 4

Safety Notes
Gloves should be worn during installation to prevent
!
crushing and cutting injuries.
The product may only be used for bathing, hygienic
!
and body cleaning purposes.
The hot and cold supplies must be of equal pressures.
!
The product may not be used as a holding handle. A
!
separate handle must be installed.
Do not allow the streams of the shower touch sensitive
!
body parts (such as your eyes). An adequate distance
must be kept between the shower and you.
Installation Instructions
• Prior to installation, inspect the product for transport
damages. After it has been installed, no transport or
surface damage will be honoured.
• The pipes and the fixture must be installed, flushed
and tested as per the applicable standards.
• The plumbing codes applicable in the respective
countries must be observed.
Technical Data
Operating pressure:
Recommended operating pressure:
Test pressure:
Hot water temperature:
Thermal disinfection:
• The product is exclusively designed for drinking
water!
• Safety against backflow
4
max. 1 MPa
0,1 - 0,5 MPa
1,6 MPa
(1 MPa = 10 bar = 147 PSI)
max. 60°C
70°C / 4 min
Assembly (see page 30)
English
Symbol description
Do not use silicone containing acetic acid!
Dimensions (see page 34)
Flow diagram (see page 34)
Maintenance (see page )
The check valves must be checked regularly according to
EN 806-5 in accordance with national or regional
regulations (at least once a year).
Spare parts (see page 39)
Cleaning (see page 36)
Operation (see page 33)
Hansgrohe recommends not to use as drinking water the
first half liter of water drawn in the morning or after a
prolonged period of non-use.