Haier 50 7 Serie Manuel D'utilisation page 22

Use
1. Before fi rst use
Remove all packaging materials. This includes the foam base and all adhesive tape
holding the wine cellar accessories inside and outside. Keep them out of children's
reach and dispose them in an environmentally friendly manner.
Clean the inside and outside of the appliance with water and a mild detergent before
putting any wine in it.
After the appliance has been levelled and cleaned, wait for at least 2 hours before
connecting it to the power supply. If your wine cellar has been tilted for any reason,
wait 24 hours before plugging it in. See section INSTALLATION.
Once you have plugged the unit into an electrical outlet, let the unit run for at least
30 minutes to acclimatize itself before making any adjustments.
The temperature is automatically set to 12 °C. If desired, you can change the tem-
perature manually. Please see TEMPERATURE.
2. Touch keys
The buttons on the control panel are touch keys, which respond when lightly touched with
3. Description for control panel
A B
A Interior light/Wi-Fi button
B °C /°Fconvertion button
C Temperature adjust button:down
D Display
4. Automatically locking function
The control panel automatically locks from any key presses after 30 seconds
from being enabled,the
for 3 seconds, when locked the back lit LED lights will dim. Button A is not locked .
5. Power button function
Press the button H for 5seconds, the wine cellar cuts off the power.Then
18
C
D
E Temperature adjust button:up
F Temperature zone selection button
G Lock button
H Power button
is light.To activate keylock press the
cellar power on.
E F
button
EN
G
H