Safety Information; General Information; Persons And Product - VOLTCRAFT BS-310XWIFI Mode D'emploi

6. Safety information

Read the operating instructions and safety information carefully. If you do not follow the safety
instructions and information on proper handling in this manual, we will assume no liability for any
resulting personal injury or damage to property. Such cases will invalidate the warranty/guarantee.
a) General information
• This product is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly, as it may become dangerous playing material
for children.
• Protect the product from extreme temperatures, direct sunlight, strong jolts, high humidity, moisture,
flammable gases, vapours and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, stop using it and prevent unauthorized use. Safe
operation can no longer be guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in adverse ambient conditions or
- has been subjected to any serious transport-related stress.
• Always handle the product carefully. Jolts, impacts or a fall even from a low height may damage the
product.
• Always observe the safety and operating instructions of any other devices which are connected to the
product.
• Consult a technician if you are not sure how to use or connect the product.
• Maintenance, modifications and repairs must be done by a technician or a specialist repair centre.
• If you have questions which remain unanswered by these operating instructions, contact our technical
support service or other technical personnel.
• Warning, LED light:
- Do not look directly at the LED light!
- Do not look into the beam directly or with optical instruments!
b) Persons and product
• This product is a precision instrument. Do not drop it or expose it to impacts.
• The base unit is not waterproof and therefore cannot be immersed under water.
• The endoscope must only be used to inspect facilities that are not connected to a power source. The
camera head is made from metal and can lead to short circuits.
• For safety reasons, turn off all power sources before each inspection.
• When you are not using the endoscope, always place the endoscope and its accessories in the case.
19