Useful Adjustment Settings; Switching The Vertical Drive Mode (Av Source Only); Adjusting Image Positions (Av Source Only); Auto Size - Pioneer PDP-5080XD Mode D'emploi

11

Useful adjustment settings

Chapter 11
Useful adjustment settings
About "Option" menus
The "Option" menu consists of two screens. To select the desired
menu, press repeatedly / to switch between Screen 1 and
Screen 2. The current screen number appears at the top right
corner on the screen.
Option
Position

Auto Size

Side Mask

HDMI Input

HDMI Control Setting

Blue LED Dimmer
Orbiter
Video Pattern
Option
Drive Mode
Colour System
Input Select
Game Control Pref
50
En
Switching the vertical drive mode
(AV source only)
You can select the desired drive mode according to the programme
you watch.
1
1/2
2
3
Off
4
5
High
• This setting can be made for each input source separately.
On
• This setting cannot be made when 480i, 480p, 1080i@60 Hz,
• The Drive Mode does not operate when "On" is selected in
2/2
Adjusting image positions
1
(AV source only)
Auto
This setting adjusts the horizontal and vertical positions of images
Off
on the plasma television.
1
2
3
4
(For AV source)
5
(/).
6
• To restore the factory defaults for all items, press / to select
• Adjustments are stored separately according to input source.
• Depending on the displayed video, the image position may not
Press HOME MENU.
Select "Option" (/ then ENTER).
Select "Drive Mode" (/ then ENTER).
Select "1", "2" or "3" (/ then ENTER).
Press HOME MENU to exit the menu.
Note
720p@60 Hz, 1080p@24 Hz or 1080p@60 Hz signals are input.
"Game Control Pref".
Press HOME MENU.
Select "Option" (/ then ENTER).
Select "Position" (/ then ENTER).
Select "H/V Position Adjust" (/ then ENTER).
Adjust the vertical position (/) or the horizontal position
Press HOME MENU to exit the menu.
Note
"Reset" in step 4, and then press ENTER. A confirmation screen
appears. Press / to select "Yes", and then press ENTER.
change even after adjustment.