Costway SP38179 Instructions De Montage page 8

8
As shown in the figure, place the Top
Pole(W) over the Middle Pole (X),
secure it with screws (E), and then
Insert the Middle Pole (X) onto the
Bottom Pole (Y) and secure it with
screws (E).
E
E
9
Install the ball net
I
H
14
W
X
Y
10
Note: Place your hand in the gap between the upper and
lower support rods, pull it up and down to the appropriate
hole position of the Disk(N), and insert the Latch (F) to
complete the height adjustment
F
If the product does not need
to be moved frequently, we
recommend filling the base
with sand instead of water.
Because water freezes below
0 degrees Celsius, it can
damage the base. Suggest
placing a weight of over 20kg
on the base.
F
Z
15