Start procedure
Insert air filter
Switch device on
1. Ensure that the condensation tank is empty and
inserted correctly. Otherwise, the device will not
operate!
2. Insert the mains plug into a properly secured
mains power socket.
3. Switch on the device at the mains switch (15).
4. Ensure that the mains switch (15) is lit.
5. Check whether the condensation tank indicator
light (16) is out. Otherwise, empty the condensate
tank.
6. Adjust the room humidity level with the rotary
switch (14).
"Continuous" operation mode
In continuous operation mode, the device dehumidi-
fies the air constantly, regardless of the humidity in
the air.
To start continuous operation mode, set the rotary
switch (14) to "Max.".
GB
Automatic defrost
If the room temperature is below 11 °C, the evapora-
tor becomes covered in frost while dehumidifying. The
device then carries out an automatic defrost. The du-
ration of the defrost can vary.
• Do not turn off the device during the automatic de-
frost. Do not remove the mains plug from the
mains socket.
Emptying the condensation tank
A.
B.
C.
D.
Operating Manual – Dehumidifier TTK 175 S
B - 9