Publicité
Les langues disponibles
Les langues disponibles
USING
USING
minutes can be accessed directly by pressing the
key at the start.
If the +/- keys are not pressed for 20 seconds, the
cooking time is validated (LED b is no longer lit)
and the +/- keys switch back to the power setting
of the active hotplate (LED a is lit)
At the end of the cooking time, the display indi-
cates 0 and a beep sounds for about 20 seconds.
To deactivate it, press any key.
To stop the timer manually, press and hold the
+ and - keys simultaneously or return to 0 with
the - key.
Multiple fireplaces in operation:
When several fireplaces are lit (with power level
>0), the timer is always set in the following order:
front left, rear left.
Press
, to select the heater.
The setting is then made by pressing + or -.
12
CHILD SAFETY
Your hob has a child safety device which locks the
controls when the hob is not in use or when it is
being used for cooking. Due to safety reasons, the
keys remain active and authorise the heating
zones to be switched off even when locked.
Locking
Press
. The LED above the lock lights up and
a beep confirms your operation.
The display of cooking zones in operation alterna-
tely indicates power and the locking symbol
Unlocking
Press
until the locking symbol
and a beep confirms your operation.
CLEAN LOCK function:
The Clean Lock function permits the temporary
locking of your hob while it is being cleaned.
To activate the Clean Lock function, press briefly
on
. The LED above the lock flashes and a
beep confirms your operation. After around
1 minute, locking is automatically deactivated.
Two beeps will sound and the light will switch off.
You can stop the Clean Lock function at any time
by holding down the
EN
disappears
button.
.
Publicité
