Publicité
Les langues disponibles
Les langues disponibles
USING
USING
SWITCHING ON - STOPPING
Switching on:
Press the
key corresponding to the required
burner. A 0 and a beep indicate that the cooking
zone is on. You can adjust the required power of
the burner selected. If you do not set the power
level, the cooking zone will be switched off auto-
matically.
Stopping a zone:
Keep the
key corresponding to the required
burner pressed down.
A long beep sounds and the display switches off or
the "H" symbol (residual heat) appears.
+ / - Power setting
When switching on, you can switch directly to
power level 9 by pressing the - button.
Press the + or - button to set the power level from
1 to 9.
With a power < 5, a quick double press on the +
button allows direct access to power 5.
With a power level > 5, a quick double press on
the + button allows you to switch directly to power
level 9.
UPress
SETTING THE TIMER
Each cooking zone has a dedicated timer that can
be set for up to 99 minutes. The timer is incre-
mented from 1 to 15 and then from 5 to 99 and
can be started as soon as the relevant cooking
zone is in operation.
1 cooking zone in operation :
Press
want to assign the timer. The timer of the active
cooking zone has its LED highlighted
The timer zeros are flashing with the timer units
LED and the active focus LED.
a: led (outside the display) of the fire place indi-
cator being set, it flashes and is more intense than
the others.
b: LED (at the edge of the display) indicating
that the timer is being set. The + and - buttons
are active for setting the timer. When the timer
disappears, the + and - buttons are active for the
power setting of the selected heater.
X2
The setting is then made by pressing + or -. 99
to access the maximum power.
, to select the cooking zone to which you
a
b
EN
X2
11
Publicité
