Uline H-2293 Mode D'emploi page 3

2. Holding the cable band, loop the end of cable
through the hook on the underside of the trash can
lid. (See Figure 7)
Figure 7
3. Loop the end of the cable through the other side of
the cable band and pull tight. (See Figure 8)
Figure 8
PAGE 3 OF 9
ASSEMBLY CONTINUED
4. Repeat steps 1-3 with the opposite side of the cable
attaching to the edge of the receptacle base in
place of the trash can lid. (See Figure 9)
5. Insert liner into the receptacle base. Set receptacle
lid on liner. (See Figure 10)
1-800-295-5510
uline.com
Figure 9
Figure 10
0621 IH-2293