Timberwolf TZ3000H Manuel D'installation Et D'utilisation page 27

fi nishing
EN
catalyst temperature monitor installation
6.3.5
WARNING
!
• It is important to install the catalyst temperature monitor prior to framing in the appliance completely.
Before installing the new catalyst temperature monitor, determine how the existing catalyst temperature monitor is
mounted. The options for mounting are:
1. Wall mounted
2. Hearth mounted
If wall mounted, remove the top and bottom trim off of the appliance. If hearth mounted, remove bottom trim only.
Top Trim Removal
A
B
C
Loosen set screw, unthread and
Pull decorative trim away from
Unscrew the four retaining screws.
remove the knob on the right side of
appliance.
the decorative trim.
Bottom Trim Removal
B
A
Remove the screws on the left & right
side of the decorative trim.
Pull decorative trim away from appliance.
27
W415-2827 / 02.14.20