Timberwolf TZ3000H Manuel D'installation Et D'utilisation page 26

fi nishing
EN
door gap adjustment
6.3.4
The door gap for the TZ3000H (see graphic below) can be set by adjusting the hinges of each door (x4). Each
hinge contains a set screw located on the side of the hinge. Loosen the set screw and turn the slotted hinge pin
to create an even gap. Each hinge can be adjusted independently.
Top Gap
Bottom Gap
26
W415-2827 / 02.14.20
Door gap and hinge location
Hinges X 4