Bosch VitaPower MMB6382M Manuel D'utilisation page 23

¡ If the ingredients in the blender jug are
not going round and being properly
mixed, use the pusher to press the in-
gredients down.
Sample recipe
Sports drink
Ingredients:
¡ 250 g honey (cold, 7-9 °C)
¡ 5 g cinnamon
¡ 200 g milk (warm, 65 °C)
Preparation:
¡ Add the honey and cinnamon to the
blender.
¡ Blend the ingredients for 5 seconds at
level ⁠ .
¡ Add the milk.
¡ Blend the ingredients for 5 seconds at
level ⁠ .
To-Go blender jug
→ Fig. 39
Tr oubl e s hoot i n g
Troubleshooting
Tr oubl e s hoot i n g
The appliance is not working.
The mains plug of the power cord is not
plugged in.
▶
Connect the appliance to the power
supply.
The circuit breaker in the fuse box has
tripped.
▶
Check the circuit breaker in the fuse
box.
There has been a power cut.
▶
Check whether the lighting in your room
or other appliances are working.
The status display (LED) flashes.
The lid or blender jug are not locked or
were removed during processing.
▶
Set the rotary switch to ⁠ .
Place the blender jug on the main unit
1.
and turn clockwise until it engages.
Turn the lid in the direction
2.
gages.
a The colour of the lock indicator for the
lid changes from red to green.
Programme was cancelled using the rotary
switch.
▶
Set the rotary switch to ⁠ .
Appliance has a humming sound.
The blade is blocked or stiff.
▶
Set the rotary switch to ⁠ .
▶
Remove the blockage.
Appliance switches off during use.
Processing quantity is too big or
processing time was too long.
▶
Set the rotary switch to ⁠ .
▶
Reduce the processing quantity.
▶
Allow the appliance to cool down to
room temperature.
The programme does not start.
The rotary switch is not set to .
▶
Set the rotary switch to ⁠ .
The programme has been cancelled using
the programme button.
Set the rotary switch to ⁠ .
1.
Press the programme button for the re-
2.
quired programme.
Liquid is leaking from the blade insert.
Seal between the blender jug and the blade
insert is missing.
▶
Insert the seal on the EasyClick blade
insert.
a The seal is seated in the groove.
a The sealing lips point in the direction of
the blender jug.
a The smooth sealing surface lies against
the EasyClick blade insert.
until it en-
Troubleshooting en
23