Sauder Cannery Bridge Serie Mode D'emploi page 21

Step 17
å
Insert a SLIDE CAM (10A) into the DRAWER SIDES (D14 and D15).
å
Fasten the DRAWER RIGHT (35GC) to the RIGHT DRAWER SIDE (D14)
and the DRAWER LEFT (35GD) to the LEFT DRAWER SIDE (D15). Use
four GOLD 5/16" FLAT HEAD SCREWS (3S) through holes #1 and #3.
å
NOTE: The screw head in the CAM must be visible through the slotted
hole in the SLIDE.
2
3
www.sauder.com/service
Roller end
1
10A
D15
3S
GOLD 5/16" FLAT HEAD SCREW
(4 used in this step)
420337
Screw head - turn CAM to line up holes in
the SLIDES with holes in DRAWER SIDES
10A
D14
2
3
5
Roller end
1
Page 21