Bosch 121401266 Notice Originale page 32

32 | English
Switch on the measuring tool.
Press and hold button (4) [Func] until "∓" and "mft" flash on the display. "0.000 m" is
shown at the bottom of the display.
Press the button (6) [+] or the button (3) [–] to change the unit of
measure. "0.000 ft" is shown at the bottom of the display.
Press the button (6) [+] or the button (3) [–] to change the unit of
measure again. "0'00"" is shown at the bottom of the display.
To exit the menu item, press the measuring button (2) [ ] or the on/off button (5) [ ].
The selected setting remains saved after you switch off the measuring tool.
Switching sound on/off
The sound is switched on by default.
Switch on the measuring tool.
Press and hold button (4) [Func] until "∓" and "mft" flash on the
display. "0.000 m" is shown at the bottom of the display.
Press and hold button (4) [Func] until "∓" and "Sound" flash on the
display. "On" is shown at the bottom of the display.
Press button (6) [+] or button (3) [–] to switch off the sound. "OFF"
is shown at the bottom of the display.
To switch on the sound, press button (6) [+] or button (3) [–] again.
1 609 92A 7L2 | (26.04.2022) Bosch Power Tools