Ryobi RAG18X Mode D'emploi page 5

them. Corrosive or conductive fl uids, such as seawater,
certain industrial chemicals, and bleach or bleach-containing
products, etc., can cause a short circuit.
■
Ambient temperature range for battery during use is
between 0°C and 40°C.
■
Ambient temperature range for battery storage is
between 0°C and 20°C.
TRANSPORTING LITHIUM BATTERIES
Transport the battery in accordance with local and national
provisions and regulations.
Follow all special requirements on packaging and labelling
when transporting batteries by a third party. Ensure that
no batteries can come in contact with other batteries
or conductive materials while in transport by protecting
exposed connectors with insulating, non-conductive caps or
tape. Do not transport batteries that are cracked or leaking.
Check with the forwarding company for further advice.
KNOW YOUR PRODUCT
See page 109.
1. Battery port
2. Handle, insulated gripping surface
3. Spindle lock button
4. Side handle
5. Guard lever lock
6. Toolless grinding guard
7. Paddle switch
8. Lock-out switch
9. Clamp nut
10. Operator's manual
11. Grinding wheel
12. Cutting disc
13. Backing flange
14. Spindle shaft
15. Toolless cutting guard attachment
16. Battery pack
17. Charger
MAINTENANCE
■
The product should never be connected to a power
supply when assembling parts, making adjustments,
cleaning, performing maintenance, or when the product
is not in use. Disconnecting the product from the power
supply will prevent accidental starting that could cause
serious injury.
■
When servicing, use only original manufacturer's
replacement parts, accessories, and attachments. Use
of any other parts may create a hazard or cause product
damage.
■
Do not at any time let brake fluids, gasoline, petroleum-
based products, penetrating oils, etc., come in contact
with plastic parts. Chemicals can damage, weaken, or
destroy plastic which may result in serious personal
injury.
■
Avoid using solvents when cleaning plastic parts. Most
plastics are susceptible to various types of commercial
solvents and may be damaged by their use. Use clean
cloths to remove dirt, carbon dust, etc.
■
For greater safety and reliability, all repairs should be
performed by an authorised service centre.
SYMBOLS
Safety alert
Direct current
Please read the instructions carefully before
starting the product.
Wear ear protection.
Wear eye protection.
Wear dust mask.
Wear safety hand gloves.
Wear non-skid safety shoes.
Always operate with two hands.
Do not use the guard for cut-off operations.
Do not use chipped, cracked, or defective
grinding wheel
Do not use for cutting.
Use a guard.
Metal
Not for wet grinding. Using water or other
liquid coolants may result in electrocution
or shock.
Do not use for face grinding.
5
Original Instructions
EN
FR
DE
ES
IT
NL
PT
DA
SV
FI
NO
RU
PL
CS
HU
RO
LV
LT
ET
HR
SL
SK
BG
UK
TR
EL