Publicité
Les langues disponibles
Les langues disponibles
USE
Device overview
1 - Status LEDs
2 - Function key (On/Off)
3 - USB-A 1 OUT
4 - USB-C In
5 - USB-A 2 OUT
6 - microUSB IN
Operation
1. Function key (ON/OFF)
By briefly pressing the key, the current battery status is displayed through the LED lights and the
Powerbank is activated.
If no device is connected to the Powerbank, or the connected device is fully charged, the Power-
bank changes automatically into standby mode after a time interval of approx. 40 seconds.
2. LED Status display
The individual LEDs display the remaining energy of the Powerbank:
% - Energy
1 % - 25 %
26 % - 50 %
51 % - 75%
76 % - 100 %
3. Commissioning / Charging the Powerbank / Charging connected devices
a) Charging the Powerbank
Please connect the supplied USB-C to USB-A charging cable with the USB-C connection (USB-C In)
of the Powerbank and connect the opposite end of the USB cable with the Standard USB-A port of
a computer or USB power supply. You can also use a USB-A to microUSB cable to charge the Pow-
erbank through the microUSB connection (microUSB In). Always use only one of the two charging
options, the USB-C port (USB-C In) or the microUSB port (microUSB In)! The charge process and
the current charge status is signalled by the LED status lights. If the Powerbank is fully charged, the
LED status lights are lit permanently. The required charging time of the Powerbank is dependent
on the selected charging source and its output power (max. 5V / 2A).
1
2
3
4
LED 1
LED 2
EN - Page 3 of 7
5
6
LED light
LED 3
LED 4
Publicité
