the refrigerator doors are opened frequently,
or a large batch of food is placed inside
the refrigerator. In order to restore a colder
temperature in the refrigerator, put the quick
freeze & cool setting on to set the unit to the
coolest temperature.
By selecting this function the temperature
of the freezer and fridge compartments will
automatically be set to -24°C and 2°C for a
GB
maximum of 26 hours for the freezer setting and
2 hours 30 minutes for the fridge setting (after
this time the temperature will revert to what it
was previously set at).
If the temperature of freezer goes below -24°C
during the 26 hours then the appliance will exit
the quick freeze mode automatically.
To use the quick freeze and cool modes together
you must press the mode button until the quick
freeze and cool icons are lit on the display. To
exit thequick freeze and cool mode press the
mode button until no mode icon is liton the
display.
Quick cooling mode
This mode is designed for times when the
refrigerator warms past the point of cooling,
such as when the weather is extremely warm,
14
.
the refrigerator door is opened frequently, or
a large batch of warm food is placed inside
the refrigerator. In order to restore a colder
temperature in the refrigerator, put the quick
cool setting on to set the unit to the coolest
temperature. By selecting this function the
temperature of the fridge compartment will
automatically be set to 2°C for a maximum of
2 hours and 30 minutes (after this time the
temperature will revert to what it was previously
set at).
Door open alarm
There will be a sound alarm when the fridge or
freezer door is open for more than 120S, the
sound alarm will disappear if the door closed or
press the mode button for 2S.
Notes: if found error code like E1/E2/E5/E6/
E7, please contact after service for repairment.
Door Height Adjustment
If the doors of the appliance are not aligned then
the height of them can be adjusted, if required
please follow the below steps.
Note: The maximum height adjustment is 5mm
Rotate the locking nut clockwise (as shown in
the diagram below) with a wrench for 2 full
GB
15