General Maintenance; Spark Plug Inspection; Air Filter - Far Tools 118015 Notice Originale

ALL MAINTENANCE WORK IS CARRIED OUT WHEN THE ENGINE IS STOPPED. ALWAYS DISCON-

SPARK PLUG INSPECTION

1- Check for discoloration and remove the carbon Standart electrode color : Tan
color.
2- Check the spark plug type and gap. Standard spark : BR5ES (NGK).
-Spark plug gap : 0,7 - 0,8 mm.
3- Install the spark plug. Spark plug Torque : 28Nm (2,8 Kgm, 20 lb.pi)
SILENCER
You should periodically remove the Carbon deposits.
1- Remove the muffler protector.
2- Remove the muffler
3- Remove the Carbon deposits using a wire brush and by trapping the muffler
body lightly.
4- Reinstall the muffler.
The engine and mufler will be very hot after the engine has been run. Avoid touching
!
the engine and muffler while are still hot with any part of your body or clothing during
inspection or repair.

AIR FILTER

1- Remove the air filter cover and element.
2- Wash the element in solvent and dry.
3- Oil teh element and squeeze out excess oil. The element should be wet but not
dripping. recommanded oil : Foam-air-filter oil or SAE 20 motor oil.
4- Insert the element into the air filter .
N.B : Be sure the element sealing surface matches the air filter so there is no air
leak.
118015-3-Manual-G.indd 32

GENERAL MAINTENANCE

NECT THE SPARK PLUG LEAD.
© FAR GROUP EUROPE
EN
25/10/13 9:19:33