Far Tools 118015 Notice Originale page 37

EN
ENGINE
1- Remove the Saprk plug, about one tablespoon of two-stroke oil into the spark
plug.
recoil star the engine by turning over several times (with ignition off) to coat the
cilynders walls with oil.
2- Pull the recoil starter until you feel compression. Then stop pulling. (This prevents
the cylinder and valaves from rusting)
3- Clean exterior of the generator and apply a rust inhibitor.
4- Store the generator in a dry, well- ventilated place, with th ecover placed over it.
5- The generator must remain in a vertical position when stored, carried and ope-
rated .
© FAR GROUP EUROPE
118015-3-Manual-G.indd 37 25/10/13 9:19:36