Getting To Know Your Device - Beurer SR BM1 Mode D'emploi

Content

1. Getting to know your device ..............................................18

2. Important notes ..................................................................18
3. Device description ..............................................................22
4. Preparing the measurement ...............................................23
5. Measuring blood pressure ..................................................24
6. Evaluating results ...............................................................26
Dear customer,
Thank you for choosing one of our products. Our name stands
for high-quality, thoroughly tested products for applications in
the areas of heat, weight, blood pressure, body temperature,
pulse, gentle therapy, massage, beauty and air. Please read
these instructions for use carefully and keep them for later use,
be sure to make them accessible to other users and observe
the information they contain.
With kind regards,
Your Beurer team
1. Getting to know your device
Check that the packaging of the Beurer SR BM 1 blood pres-
sure monitor has not been tampered with and make sure that
all the required contents are present. Before use, ensure that
there is no visible damage to the device or accessories and
that all packaging material has been removed. If you have any
doubts, do not use the device and contact your retailer or the
specified Customer Services address.
ENGLISH
7. Display and delete measured values ................................28
8. Cleaning and storing the device and cuff .........................30
9. Error messages/troubleshooting ......................................31
10. Technical specifications ...................................................31
11. Mains part.........................................................................32
The upper arm blood pressure monitor is used to carry out
non-invasive measurement and monitoring of the arterial blood
pressure values in adults.
This allows you to quickly and easily measure your blood pres-
sure, save the measured values and display the development
and average values of the measured values taken.
You are also warned of possible existing cardiac arrhythmia.
The recorded values are classified and evaluated graphically.
2. Important notes
Signs and symbols
The following symbols are used in these instructions for use,
on the packaging and on the type plate for the device and the
accessories:
18
Attention