Publicité
Note on network functions
When you use network functions,
unintended third parties on
the network may access the
camera, depending on the usage
environment.
For example, unauthorized access
to the camera may occur in network
environments to which another
network device is connected or can
connect without permission. Sony
bears no responsibility for any loss
or damage caused by connecting to
such network environments.
Note on the 5 GHz band for
wireless LAN
When using the wireless LAN function
outdoors, set the band to 2.4 GHz
by following the procedure below.
(WW411329 only)
• MENU
(Network) [Wi-Fi]
[Wi-Fi Frequency Band]
How to turn off wireless network
functions (Wi-Fi, etc.) temporarily
When you board an airplane,
etc., you can turn off all wireless
network functions temporarily using
[Airplane Mode].
CAUTION
For safety, do not connect the
connector for peripheral device wiring
that might have excessive voltage to
LAN terminal.
Follow the instructions for LAN
terminal.
Power Cord
Multiple power cords may be
supplied with this equipment. Use
the appropriate one that matches
your country/region.
For the customers in the UK, Ireland,
Malta and Cyprus
Use the power cord (A).
For safety reasons, the power cord (B)
is not intended for above countries/
regions and shall therefore not be
used there.
For the customers in other EU
countries/regions and Israel
Use the power cord (B).
For safety reasons, the power cord (A)
is not intended for above countries/
regions and shall therefore not be
used there.
(A)
LAN cable
Use a Category 5e or higher Shielded
Twisted Pair (STP) cable with high
shielding performance.
EN
(B)
EN
81
Publicité
